Minimum Requirements for Downloadable Demo:

Windows '95/ Pentium 75/ 8MB RAM/ PCI Video Card with Direct X Support / PCI Drive Controller/ 2X CD-ROM drive/ 16-bit audio/ 2 button mouse

To Install:

Run the Setup program and follow the instructions.


To Play:

Click on the screen where it says "New Player".  Next, click on the "Edit Player" 
button and choose your character (you may only choose Chucky or Flo for this 
demo.)  You may have up to two players.

After you have set up your players, click on the "Start" button.  Once on the 
bowling screen, line up your player (drag and drop) and the direction arrow 
(located on the lane) to set up your shot.

Place the mouse cursor anywhere on the meter in the upper right corner of the 
screen.  Left click (do not hold) the mouse button and a flashing green light 
will begin revolving around the outer ring of the meter.  This indicates the 
amount of spin your bowler will put on the ball.  The faster the spin meter revolves, 
the more spin your ball will have.  When the spin meter reaches your desired spin 
velocity, left click the mouse button.  You may choose to increase or decrease your 
spin as you become familiar with each bowler's characteristics.

After you have specified your desired spin velocity, lights in the left side 
of the inner ring will begin to cycle.  This is the power meter indicator.  
When the power meter has reached the desired point, left click the mouse 
button.  The ideal power point is indicated by the white light right before the red 
area of the meter.  However, you may choose to increase or decrease your power as you 
become familiar with each bowler's characteristics.

The inner right side portion of the meter controls the bowler's release point.  
After you have specified your desired power point, lights in the inner right side 
portion of the ring will begin to cycle.  This portion of the ring indicates the 
release meter.  The ideal release point is indicated by the white light in the center 
of the blue area.  Left click the mouse button to "lock" in the release point.


Important Note:  This setup is for right handed bowlers.  The opposite applies 
to lefties.

You are now ready to Bowl!

To exit:

Right click the mouse to get the Exit and Options Menu.


Ten Pin Alley for you PC - Available May 1. 

For more information check out the ASC Games website at:
www.ascgames.com